Customers PS MODS Traxxas 3.3 engine with STOCK CARB Insane Ported n

3 3 Traxxas Carb Setting. Fits Traxxas TMaxx 3.3 490773 ENGINE (TMAXX Jato Nitro Revo Every video and no thing I read says the 3.4 makes the 3.3 much better with the off idle gurgle, inconsistent idle, and low-mid performance which is where mine gets annoying. Factoy break-in (default) carburetor settings: Hi-speed needle

Hoping for a drop in install with no modifications needed Always use the factory settings for initial starting

LOU F CUSTOMER PS MODS TRAXXAS 3.3 PORTED POLISHED MODIFIED RACING

Carb settings for Traxxas 3.3! Thread Tools: Dec 27, 2008, 02:40 PM #1; helinut4ever To do this, use a small flat blade screwdriver to turn the high speed need clockwise until it bottoms out (do not over tighten the screw). 2) Set the low-speed needle so the screw head (red in Fig

Fits Traxxas TMaxx 3.3 490773 ENGINE TMAXX Jato Nitro Revo Ezstart. I found that turning it out half a turn from being perfectly. Only use these settings when the factory settings have been lost

Fits Traxxas TMaxx 3.3 490773 ENGINE TMAXX Jato Nitro Revo Ezstart. To do this, use a small flat blade screwdriver to turn the high speed need clockwise until it bottoms out (do not over tighten the screw). 1) Set the high-speed needle to 4 turns out from closed